Overnight stops between Pittsburgh and Portland (ME)

This route summary is built from our v1 seed model, so treat every number as an estimate you confirm the day you drive. The corridor runs northeast-bearing from Pittsburgh toward Portland (ME) and the straight-line midpoint sits at 42.15, -75.25.

Both ends of this corridor keep the same clock, so your arrival math stays simple.

In practice the rhythm of the trip is simple: 4 h 25 to the first bed in Binghamton, and a final 4 h 38 push into Portland (ME). Nothing here is routed mileage yet — the seed model estimates road distance from geometry, so your odometer will read a few percent different by the end.

Estimated corridor (straight-line path x road factor). Numbered markers are planned overnight stops: 1. Binghamton, NY.

As the Broome County seat, Binghamton has a courthouse-square core with the restaurants and services county seats collect. It sits about 49 mi from Scranton, Pennsylvania, if you want a bigger-city fallback.

Why here and not somewhere else on the corridor: our solver scores every seed town near the day-split target of 4 h 32, and Binghamton wins on the combination of a 0.9 h detour paid back in hotel choice, lodging depth (6 estimated hotels), and balance — you still have 5 h 31 to cover on the next driving day.

Shape the evening around the clock, not the odometer. You roll in near 12:40 pm local with 5 h 31 of driving ahead tomorrow, which is enough margin for a sit-down dinner and a full night — the plan deliberately avoids the 10 pm motel-door arrival that ruins day 2 of a 2-day drive.

The estimated 6 hotels here can sell out around local events, so lock a room before you pass the last easy exit. In the morning, an 8:00 am start from Binghamton puts you in Portland (ME) around 1:46 pm local on the final leg.

Two more seed towns bracket the same stretch of the Pittsburgh–Portland (ME) corridor. They trade a little convenience for a different pace: an earlier exit shortens day one but lengthens day two, and the reverse is true past Binghamton.

Alternates are not consolation prizes. A town 49 min off the primary's pace can be the right call when a storm crosses the corridor or you simply want dinner in a different county — every card below carries the same numbers as the primary, so swap without re-planning.

Our split model targets equal driving days — 4 h 32 at the wheel each day — and the towns above land within minutes of those targets. Arrival times assume an 8:00 am departure, local time, plus a 15-minute break for every 3 hours of driving.

Arrival clocks use estimated local time (standard offsets). This corridor stays in one time zone. Total breaks across the trip: about 45 min.

The plan flexes in one direction easily: sliding departure to 7:00 am buys dinner options in every stop town — Binghamton — without changing any overnight. What does not flex is daily mileage — each day is already 4 h 32 of the 9 h 03 total, so adding a stop means dropping one of the towns above, not stretching the day.

Lodging counts below are population-derived seed estimates, not live inventory. The book-any-night flag means 8 or more estimated hotels; anything less and you should reserve before your travel day.

Two booking rules carry the whole table. First, match the town to your fatigue, not to the clock — pushing 30 min past Binghamton to save a day usually means arriving at the far end wrecked. Second, on a 2-day drive the hotel is the only fixed cost you control on the road, so compare the Binghamton rates above before you pass the last interstate exit for it.

Plan fuel on distance, not on faith: 579.3 mi means about 2 fuel stops at 350 mi per tank. For late food, treat our seed data as a starting point — confirm 24-hour options directly with the station or restaurant before you count on them.

Each planned stop clears a practical bar — an estimated 6 to 6 hotels across the corridor's sleep towns — but the v1 inventory does not tag amenities yet. Budget dinner before 9 pm or pack a cooler. The one number you can trust is distance: 579.3 mi is 2 tank-sized chunks, and every planned stop town is big enough (population 47,043 and up) to hold the fuel and food a highway exit usually collects.

Leave at 8:00 am and you clear Pittsburgh before midday traffic peaks, arriving at Binghamton around 12:40 pm. Check the usual metro choke points at each end; everything between is steady cruising on this estimate. The midpoint sits near latitude 42, so winter daylight is short — aim to be parked by 5:30 pm in December and January. At 9 h 03 total, this is a 2-day drive at a humane 4 h 32 per day.

Run the money before you commit 2 days to the road. Estimated fuel for the 579.3 mi run is about $81.10 one way at $3.50/gal and 25 mpg, against a $280.00-per-person fare assumption. Break-even sits at 0.3 travelers: solo, the road costs about $198.90 less, while a party of four saves roughly $1038.90 by driving — the trade is about 4.1 h of your time, since flying runs an estimated 4 h 55 door to door against 9 h 03 at the wheel. On those numbers the honest call for this corridor: drive.

• Pittsburgh to San Francisco (37.4 h)
• Portland (ME) to San Francisco (45.0 h)
• Pittsburgh to Oakland (37.3 h)
• Portland (ME) to Oakland (44.9 h)
• Pittsburgh to Fremont (37.1 h)
• One-tank trips from Pittsburgh