Overnight stops between Billings and Dayton

A 21 h 27 drive — sleep in Pierre and Cedar Rapids

1373.0 mi21 h 27 estimated2 night stops~4 fuel stopsestimated drive times

The 21 h 27 estimated drive between Billings and Dayton covers 1373.0 mi and 7 states. This page plans it as a 3-day trip with 2 overnight stops — starting with Pierre and Cedar Rapids — using our seed drive model and town inventory. Nothing below is copied between corridors — the arrival clocks and detour math were rerun for Billings–Dayton.

Quick answer

Plan on Pierre, South Dakota. At 7 h 22 from Billings it lands close to the 7 h 09 first-night split our planner targets, and its 4-hotel seed count makes it the strongest sleep spot on this corridor. Can't book it? Sioux City (10 h 37 from Billings) and Brookings (9 h 36 out) plan out almost the same.

Pierre has a smaller estimated hotel pool (about 4), so book ahead on weekends. The full plan below assumes an 8:00 am departure and 15 minutes of breaks for every 3 hours at the wheel.

Arrival, in plain numbers: leave Billings at 8:00 am and the plan has you walking into a Pierre lobby around 3:52 pm local, with 14 h 41 left to Dayton the next morning. That leaves time for a real dinner — the estimated 4 hotels here sit in a town of 14,097, which usually means at least a couple of kitchens open past 8 pm.

We may earn a commission when you search Kayak through our links.

Hotels in Pierre — next Friday

The drive at a glance

This route summary is built from our v1 seed model, so treat every number as an estimate you confirm the day you drive. The corridor runs east-bearing from Billings toward Dayton and the straight-line midpoint sits at 43.42, -95.75.

Route summary (estimated)Billings to Dayton
Distance1373.0 mi of road (estimated)
Estimated driving time21 h 27 at the wheel
States crossed7 (estimated): Montana, Wyoming, South Dakota, Iowa, Illinois, Indiana, Ohio
Overnight stops planned2 — Pierre, Cedar Rapids
Fuel stopsAbout 4 (1373.0 mi at roughly one stop per 350 mi)
Driving days3 days at 7 h 09 per day

You cross 2 time zones (Montana to Ohio), so the local clock runs later by 2 hours as you travel.

In practice the rhythm of the trip is simple: 7 h 22 to the first bed in Pierre, a 7 h 09 hop to Cedar Rapids, and a final 6 h 56 push into Dayton. Nothing here is routed mileage yet — the seed model estimates road distance from geometry, so your odometer will read a few percent different by the end.

The corridor at a glance

BillingsDayton1Pierre, SD2Cedar Rapids, IA

Estimated corridor (straight-line path x road factor). Numbered markers are planned overnight stops: 1. Pierre, SD · 2. Cedar Rapids, IA.

Primary stop: Pierre, South Dakota

FactPierre, South Dakota
Population14,097 (seed estimate)
CountyHughes — county seat
Cumulative drive from Billings7 h 22 (442.0 mi)
Remaining to Dayton14 h 41
Detour vs direct routeAbout 36 min
Estimated hotels4
Booking profileBook-ahead (fewer than 8 estimated hotels)

As the Hughes County seat, Pierre has a courthouse-square core with the restaurants and services county seats collect.

Why here and not somewhere else on the corridor: our solver scores every seed town near the day-split target of 7 h 09, and Pierre wins on the combination of a modest detour, lodging depth (4 estimated hotels), and balance — you still have 14 h 41 to cover on the next driving day.

Shape the evening around the clock, not the odometer. You roll in near 3:52 pm local with 14 h 41 of driving ahead tomorrow, which is enough margin for a sit-down dinner and a full night — the plan deliberately avoids the 10 pm motel-door arrival that ruins day 2 of a 3-day drive.

The estimated 4 hotels here can sell out around local events, so lock a room before you pass the last easy exit. In the morning, an 8:00 am start from Pierre puts you in Dayton around 1:41 am local on the final leg.

Alternate stop towns

Two more seed towns bracket the same stretch of the Billings–Dayton corridor. They trade a little convenience for a different pace: an earlier exit shortens day one but lengthens day two, and the reverse is true past Pierre.

Alternates are not consolation prizes. A town 3 h 15 off the primary's pace can be the right call when a storm crosses the corridor or you simply want dinner in a different county — every card below carries the same numbers as the primary, so swap without re-planning.

Sioux City, Iowa

85,684 people, an estimated 10 hotels, 10 h 37 from Billings — about 3 h 15 farther along. A book-any-night kind of town. Detour about 8 min.

Brookings, South Dakota

23,377 people, an estimated 4 hotels, 9 h 36 from Billings — about 2 h 14 farther along. Book ahead here. Detour about 3 min.

Day-by-day plan (3 days)

Our split model targets equal driving days — 7 h 09 at the wheel each day — and the towns above land within minutes of those targets. Arrival times assume an 8:00 am departure, local time, plus a 15-minute break for every 3 hours of driving.

DayFromDepartToArrive (local, est.)DrivingMilesSleep
Day 1Billings8:00 amPierre, SD3:52 pm7 h 22442.0 miOvernight Pierre
Day 2Pierre8:00 amCedar Rapids, IA4:39 pm7 h 09487.3 miOvernight Cedar Rapids
Day 3Cedar Rapids8:00 amDayton4:26 pm6 h 56443.7 miArrive Dayton

Arrival clocks use estimated local time (standard offsets). Crossing 2 time zones shifts the clock by 2 h; plan meals on driving time, not the dashboard clock. Total breaks across the trip: about 1 h 45.

The plan flexes in one direction easily: sliding departure to 7:00 am buys dinner options in every stop town — Pierre, Cedar Rapids — without changing any overnight. What does not flex is daily mileage — each day is already 7 h 09 of the 21 h 27 total, so adding a stop means dropping one of the towns above, not stretching the day.

Where to sleep, stop by stop

Lodging counts below are population-derived seed estimates, not live inventory. The book-any-night flag means 8 or more estimated hotels; anything less and you should reserve before your travel day.

Stop townEstimated hotelsBooking profileRates
Pierre, SD4Book-ahead
Cedar Rapids, IA18Book-any-night

Two booking rules carry the whole table. First, match the town to your fatigue, not to the clock — pushing 30 min past Pierre to save a day usually means arriving at the far end wrecked. Second, on a 3-day drive the hotel is the only fixed cost you control on the road, so compare the Pierre rates above before you pass the last interstate exit for it.

Food and fuel, honestly

You will pass an estimated 4 fuel stops worth of distance (1373.0 mi at 350 mi per tank). The honest note: opening hours are not in the seed data yet, so gas-station coffee is a plan, not a promise — call ahead for anything you need after dark in Pierre.

Each planned stop clears a practical bar — an estimated 4 to 18 hotels across the corridor's sleep towns — but the v1 inventory does not tag amenities yet. Budget dinner before 9 pm or pack a cooler. The one number you can trust is distance: 1373.0 mi is 4 tank-sized chunks, and every planned stop town is big enough (population 14,097 and up) to hold the fuel and food a highway exit usually collects.

Timing, traffic and season

An 8:00 am start puts the boring highway miles in the morning and the last hour into Pierre in daylight — about 3:52 pm arrival on the plan above. This corridor crosses mountain states (Montana, Wyoming), where winter storms and summer pass closures can add hours — check forecasts for the high country before you commit to a schedule. The midpoint sits near latitude 43, so winter daylight is short — aim to be parked by 5:30 pm in December and January. At 21 h 27 total, this is a 3-day drive at a humane 7 h 09 per day.

Should you drive this at all?

At 21 h 27 of estimated driving this corridor sits outside the range where flying competes — the road is the plan, and the stop plan above is built for it.

Common questions

What is the halfway point between Billings and Dayton?
By time, the halfway point is about 10 h 44 out of Billings, near Sioux Falls, South Dakota in our seed model. Our planned stop Pierre sits 3 h 22 from that mark.
Can you drive Billings to Dayton in one day?
Not realistically. 21 h 27 at the wheel plus 1 h 45 of breaks runs past a 7:12 am arrival, so the 3-day plan with a night in Pierre is the honest schedule.
Where should you stop with kids?
Pierre is the anchor stop: an estimated 4 hotels, 14 h 41 still to go the next morning, and a 15-minute break built in every 3 hours. If you need an earlier exit, Sioux City shaves the first day.
Is the Billings to Dayton drive safe in winter?
The route touches mountain states (Montana, Wyoming), so winter driving means chain laws, pass closures and short daylight. Check state DOT alerts before each day of the plan.
How many fuel stops does the drive need?
About 4. We plan one fuel stop per 350 miles, and the corridor covers 1373.0 mi, so fill up in Billings, at the mid-corridor stops (Pierre, Cedar Rapids), and as needed before Dayton.

Search cars, hotels & flights

We may earn a commission when you search Kayak through our links.

Data & method

Method: v1 seed model. Drive times and distances come from straight-line geometry times a road factor, so every figure on this page is an estimate. Town facts come from a GeoNames-derived seed inventory; lodging counts are population-derived estimates. Overnight splits target equal driving days. We earn a commission from Kayak links.