Overnight stops between Bakersfield and Dayton

A 31 h 47 drive — sleep in Blanding and Sedalia

2034.1 mi31 h 47 estimated3 night stops~6 fuel stopsestimated drive times

The 31 h 47 estimated drive between Bakersfield and Dayton covers 2034.1 mi and 9 states. This page plans it as a 4-day trip with 3 overnight stops — starting with Blanding and Sedalia — using our seed drive model and town inventory. Every hotel count, detour minute and arrival clock below is computed for this corridor, not pasted from a template.

Quick answer

The best overnight is Blanding, Utah — 9 h 09 from Bakersfield and 22 h 38 from Dayton, with an estimated 1 places to sleep and essentially no detour from the direct route. Can't book it? Colby (16 h 56 from Bakersfield) and Garden City (16 h 53 out) plan out almost the same.

Blanding has a smaller estimated hotel pool (about 1), so book ahead on weekends. The full plan below assumes an 8:00 am departure and 15 minutes of breaks for every 3 hours at the wheel.

Arrival, in plain numbers: leave Bakersfield at 8:00 am and the plan has you walking into a Blanding lobby around 5:54 pm local, with 22 h 38 left to Dayton the next morning. That leaves time for a real dinner — the estimated 1 hotels here sit in a town of 3,394, which usually means at least a couple of kitchens open past 8 pm.

We may earn a commission when you search Kayak through our links.

Hotels in Blanding — next Friday

The drive at a glance

This route summary is built from our v1 seed model, so treat every number as an estimate you confirm the day you drive. The corridor runs east-bearing from Bakersfield toward Dayton and the straight-line midpoint sits at 38.87, -102.13.

Route summary (estimated)Bakersfield to Dayton
Distance2034.1 mi of road (estimated)
Estimated driving time31 h 47 at the wheel
States crossed9 (estimated): California, Nevada, Utah, Colorado, Kansas, Missouri, Illinois, Indiana, Ohio
Overnight stops planned3 — Blanding, Goodland, Sedalia
Fuel stopsAbout 6 (2034.1 mi at roughly one stop per 350 mi)
Driving days4 days at 7 h 57 per day

You cross 3 time zones (California to Ohio), so the local clock runs later by 3 hours as you travel.

In practice the rhythm of the trip is simple: 9 h 09 to the first bed in Blanding, a 14 h 38 hop to Sedalia, and a final 8 h push into Dayton. Nothing here is routed mileage yet — the seed model estimates road distance from geometry, so your odometer will read a few percent different by the end.

The corridor at a glance

BakersfieldDayton1Blanding, UT2Goodland, KS3Sedalia, MO

Estimated corridor (straight-line path x road factor). Numbered markers are planned overnight stops: 1. Blanding, UT · 2. Goodland, KS · 3. Sedalia, MO.

Primary stop: Blanding, Utah

FactBlanding, Utah
Population3,394 (seed estimate)
CountySan Juan
Cumulative drive from Bakersfield9 h 09 (585.1 mi)
Remaining to Dayton22 h 38
Detour vs direct routeAbout 0 min
Estimated hotels1
Booking profileBook-ahead (fewer than 8 estimated hotels)

Blanding is a small town, and its estimated 1 hotels skew to the practical end — the kind of place you sleep well and leave early.

Why here and not somewhere else on the corridor: our solver scores every seed town near the day-split target of 7 h 57, and Blanding wins on the combination of an almost invisible detour, lodging depth (1 estimated hotels), and balance — you still have 22 h 38 to cover on the next driving day.

Shape the evening around the clock, not the odometer. You roll in near 5:54 pm local with 22 h 38 of driving ahead tomorrow, which is enough margin for a sit-down dinner and a full night — the plan deliberately avoids the 10 pm motel-door arrival that ruins day 2 of a 4-day drive.

The estimated 1 hotels here can sell out around local events, so lock a room before you pass the last easy exit. In the morning, an 8:00 am start from Blanding puts you in Dayton around 11:23 am local on the final leg.

Alternate stop towns

Two more seed towns bracket the same stretch of the Bakersfield–Dayton corridor. They trade a little convenience for a different pace: an earlier exit shortens day one but lengthens day two, and the reverse is true past Blanding.

Alternates are not consolation prizes. A town 7 h 47 off the primary's pace can be the right call when a storm crosses the corridor or you simply want dinner in a different county — every card below carries the same numbers as the primary, so swap without re-planning.

Colby, Kansas

5,410 people, an estimated 2 hotels, 16 h 56 from Bakersfield — about 7 h 47 farther along. Book ahead here. Detour about 1 min.

Garden City, Kansas

28,151 people, an estimated 6 hotels, 16 h 53 from Bakersfield — about 7 h 44 farther along. Book ahead here. Detour about 5 min.

Day-by-day plan (4 days)

Our split model targets equal driving days — 7 h 57 at the wheel each day — and the towns above land within minutes of those targets. Arrival times assume an 8:00 am departure, local time, plus a 15-minute break for every 3 hours of driving.

DayFromDepartToArrive (local, est.)DrivingMilesSleep
Day 1Bakersfield8:00 amBlanding, UT6:54 pm9 h 09585.1 miOvernight Blanding
Day 2Blanding8:00 amGoodland, KS3:42 pm7 h 12461.8 miOvernight Goodland
Day 3Goodland8:00 amSedalia, MO4:56 pm7 h 26475.3 miOvernight Sedalia
Day 4Sedalia8:00 amDayton5:30 pm8 h511.9 miArrive Dayton

Arrival clocks use estimated local time (standard offsets). Crossing 3 time zones shifts the clock by 3 h; plan meals on driving time, not the dashboard clock. Total breaks across the trip: about 2 h 30.

The plan flexes in one direction easily: sliding departure to 7:00 am buys dinner options in every stop town — Blanding, Goodland, Sedalia — without changing any overnight. What does not flex is daily mileage — each day is already 7 h 57 of the 31 h 47 total, so adding a stop means dropping one of the towns above, not stretching the day.

Where to sleep, stop by stop

Lodging counts below are population-derived seed estimates, not live inventory. The book-any-night flag means 8 or more estimated hotels; anything less and you should reserve before your travel day.

Stop townEstimated hotelsBooking profileRates
Blanding, UT1Book-ahead
Goodland, KS1Book-ahead
Sedalia, MO4Book-ahead

Two booking rules carry the whole table. First, match the town to your fatigue, not to the clock — pushing 30 min past Blanding to save a day usually means arriving at the far end wrecked. Second, on a 4-day drive the hotel is the only fixed cost you control on the road, so compare the Blanding rates above before you pass the last interstate exit for it.

Food and fuel, honestly

You will pass an estimated 6 fuel stops worth of distance (2034.1 mi at 350 mi per tank). The honest note: opening hours are not in the seed data yet, so gas-station coffee is a plan, not a promise — call ahead for anything you need after dark in Blanding.

Each planned stop clears a practical bar — an estimated 1 to 4 hotels across the corridor's sleep towns — but the v1 inventory does not tag amenities yet. Budget dinner before 9 pm or pack a cooler. The one number you can trust is distance: 2034.1 mi is 6 tank-sized chunks, and every planned stop town is big enough (population 3,394 and up) to hold the fuel and food a highway exit usually collects.

Timing, traffic and season

Leave at 8:00 am and you clear Bakersfield before midday traffic peaks, arriving at Blanding around 5:54 pm. This corridor crosses mountain states (Nevada, Utah, Colorado), where winter storms and summer pass closures can add hours — check forecasts for the high country before you commit to a schedule. Summer heat is the main comfort variable; carry water for the warm stretches. At 31 h 47 total, this is a 4-day drive at a humane 7 h 57 per day.

Should you drive this at all?

At 31 h 47 of estimated driving this corridor sits outside the range where flying competes — the road is the plan, and the stop plan above is built for it.

Common questions

What is the halfway point between Bakersfield and Dayton?
By time, the halfway point is about 15 h 54 out of Bakersfield, near Goodland, Kansas in our seed model. Our planned stop Blanding sits 6 h 45 from that mark.
Can you drive Bakersfield to Dayton in one day?
Not realistically. 31 h 47 at the wheel plus 2 h 30 of breaks runs past a 6:17 pm arrival, so the 4-day plan with a night in Blanding is the honest schedule.
Where should you stop with kids?
Blanding is the anchor stop: an estimated 1 hotels, 22 h 38 still to go the next morning, and a 15-minute break built in every 3 hours. If you need an earlier exit, Colby shaves the first day.
Is the Bakersfield to Dayton drive safe in winter?
The route touches mountain states (Nevada, Utah, Colorado), so winter driving means chain laws, pass closures and short daylight. Check state DOT alerts before each day of the plan.
How many fuel stops does the drive need?
About 6. We plan one fuel stop per 350 miles, and the corridor covers 2034.1 mi, so fill up in Bakersfield, at the mid-corridor stops (Blanding, Goodland, Sedalia), and as needed before Dayton.

Search cars, hotels & flights

We may earn a commission when you search Kayak through our links.

Data & method

Method: v1 seed model. Drive times and distances come from straight-line geometry times a road factor, so every figure on this page is an estimate. Town facts come from a GeoNames-derived seed inventory; lodging counts are population-derived estimates. Overnight splits target equal driving days. We earn a commission from Kayak links.